Heath Rise, London, UK

Heath Rise, London, UK

Project
Heath Rise, London, UK.
Project type
Luxury Apartments
Project location
London, UK
Client
Omega Building Services
About the Client
Omega Building Services are a medium sizes M&E company who understand every project is unique and all projects thrive on attention to detail.
Heating system
Hydronic Underfloor Heating
System specifications
  • Warmup Metro Rail System
  • Warmup Pex-A pipe with lifetime guarantee
  • Warmup 3iE Energy Monitor Thermostat

The Challenge

The customer was looking for a company that could specify, design, supply and install a bespoke underfloor heating system for each of the 8 apartments and penthouses of the prestigious development.

As the project was mostly specified with wooden floors, there was a high level of concern that the floors would overheat.

The Solution

Due to the overheating concerns of the specified wooden floors; heating controls for this project were carefully selected based on their key functionalities. Warmup’s 3iE was chosen as the main thermostat throughout the development. With its integral floor probe, the 3iE could be used to limit the floor surface temperature to 27C without compromising the air temperature thanks to its built-in room temperature sensor. Furthermore, the 3iE’s adaptive learning ability for optimum start-up made it the ideal choice.
To meet the expectations and requirements of the client, Warmup also installed the hydronic Metro Rail system; a robust, highly insulated, underfloor heating system. A combination of a resilient acoustic layer, an insulation layer and the Warmup Pex-A pipe with its lifetime guarantee were installed and pressure tested prior to installation being completed.

The Result

Warmup’s 3iE energy monitor thermostat was specified and installed throughout the project to give total space control in each property of the development, creating an energy efficient and accurately controlled environment.

Product information

Metro Rail System

Manifold

Thermostats

Technical Information

Warmup Metro Insulation is available in a range of thicknesses from 25mm to 100mm in both EPS and PIR variants to help your project comply with building regulations.

The clips on the Metro Rails enable pipe to be installed at any spacing, in multiples of 50mm, with flow and return pipes installed at 25mm centres by staggering a pair of rails.

Have any questions about Warmup?