Barnsbury Place, London
Barnsbury Place – London
◩ Project Type
◩ Project location
◩ System specifications
- Warmup 140W/m² Foil Heater
- Warmup 10mm thick insulation boards
- Warmup XSTAT-W Thermostats
Bowmite Electrical Ltd
◩ Heating system
Electric Underfloor Heating
◩ Project size
To create a system design that met the stringent requirements of the client (consistent 22C room temperature with outside temperature of -4C) but also had to be simple enough to install in record time. The contractor had never installed any UFH before so it was imperative for them to be trained on site by Warmup. To remain on-schedule, we had to design, price and supply the systems for one floor at a time (10 x two bedroom flats) within a week of receiving initial plans.
Bowmite had successfully tendered for the project including an inscreed underfloor heating system as a primary heat source. From receiving the initial plans, the objective was defined and system designed by Warmup within a week. Working with laminate and carpet floor finishes, we had to ensure that heat was distributed evenly with one system. Warmup’s expert consultants advised the clients to use foil heaters instead of inscreed heating in order to achieve best results. Foil heaters were installed and the inclusion of heat pak on the carpeted areas meant that the same system could be used throughout.
A quick and simple installation of Warmup’s foil heaters resulting in a consistent room temperature of 22C. All scheduled installations were on time, resulting in a rating of the ‘most impressive supplier’, not only on this site but also by the contractor Bowmite, who rated us ‘excellent’.
Find out more about the UFH products used in this project.
Have any questions about Warmup?
If you’re interested in specifying floor heating in your next project, get in touch with us today.