Yes. A single thermostat can control multiple foil heaters, provided they are all installed within the same heating zone or room and the total electrical load remains within the thermostat’s rated capacity. Most underfloor heating thermostats are designed to control loads of up to 16 amps. In many cases, a maximum of two foil heaters […]
Can I use one thermostat to control multiple Foil Heaters ? Read More »
Yes in some instances, you may need to cut and turn the mats to suit the shape of the room. However, it is essential that you not cut, twist or kink the heating element. Watch our installation video for more guidance:
Can the Foil underfloor heater be cut and turned? Read More »
The Foil heater can be used with carpet and vinyl but must be installed in conjunction with the Warmup Dual Overlay System. Under no circumstances should the final floor covering be fitted directly on top of the foil heater. Installing the foil system under these types of soft floor finishes will result in damage to
Can the Foil Heater be used with Carpet or Vinyl? Read More »
The Foil Heater can be installed with floating wood floors. If the flooring is being glued down an alternative system will need to be installed. As a general rule the wood flooring should be no thicker than 18mm and able to withstand temperatures up to 27 °C. It is important to check with the manufacturer that
What types of Flooring can the Foil Heaters be used under? Read More »
If the heater is damaged during installation there are number of options available: 1) Safety Net Warranty If the heater is damaged during installation you can return the heater to Warmup and we will replace the heater free of charge for the same size model. (The warranty covers one heater per household/installer, please see full
What if I damage the StickyMat Heater during / after installation? Read More »
Yes, but all heaters being controlled by thermostat must be installed within the same room/zone. Each thermostat can control up to 16 amps of heating. A maximum of two heaters can be wired directly into the back of the thermostat, when installing more than two heaters connections should be made via a junction box. If
Can more than one StickyMat Heater be controlled by the same thermostat? Read More »
The StickyMat range is specifically designed for use under tiles but it is possible to use the system with other floor coverings. For this type of application the Stickymat will need to be covered with a 10mm self-levelling compound before applying the finished floor. It is important to check with the flooring manufacturer that the
Can I use the StickyMat System with floor coverings other than tiles? Read More »
If the heater is damaged during installation there are number of options available. 1) Safety Net Warranty If the heater is damaged during installation you can return the heater to Warmup and we will replace the heater free of charge for the same size model. (The warranty covers one heater per household/ installer, please see
What if I damage the Loose Wire Heater during / after installation? Read More »
Yes, but all heaters being controlled by thermostat must be installed within the same room/ zone. Each thermostat can control up to 16 amps of heating. A maximum of two heaters can be wired directly into the back of the thermostat, if installing more than two heaters connections should be made via a junction box.
Can more than one Loose Wire System be controlled by the same thermostat? Read More »
Warmup offers an extensive range of electric and water floor systems compatible with all floor types, rooms and projects. Now with 7iE and Smartcare.
![Thumbnail [200x250]](/wp-content/uploads/Electric-Category-Page-Image.jpg)
![Thumbnail [200x250]](/wp-content/uploads/Hydronic-Category-Page-Image-1.jpg)
![Thumbnail [200x250]](/wp-content/uploads/6iE-Projects.jpg)
