In this video we will be showing you how to change the colour theme on the Element. Unlock the Element and select the settings icon Then scroll to select the paint bucket icon Select a colour from the options available, then tick to confirm Continuously press the “x” to return to the home screen Now […]
How do I change the colour theme on the Element WiFi Thermostat? Read More »
In this video we will be showing you how to adjust the brightness on the Element. Unlock the Element and select the settings icon Scroll to the brightness icon and tick to select Use the arrows to select a brightness level between 1-10 Set the brightness for active mode, day standby mode and night standby
How do I adjust the brightness on the Element WiFi Thermostat? Read More »
A dual overlay system is designed to create a smooth, stable, and level subfloor above electric foil underfloor heating systems. Installed as a free-floating layer, it protects the heating elements while providing a suitable surface for a wide range of floor finishes. This type of overlay is particularly recommended for soft and resilient flooring materials,
What Is the Purpose of a Dual Overlay System? Read More »
No. The base board and top board are supplied with a pre-applied contact adhesive that is designed to bond the two layers securely during installation. No additional glue or adhesive is required or recommended, as using extra bonding materials may affect the installation process or the performance of the system. For the best results, always
Do I Need Additional Glue or Adhesive for the Base Board and Top Board? Read More »
The top boards stick directly to the base boards. However, it needs to be ensured that each layer is laid out with staggered joints and arranged so that the top boards overlap the joints in the base board. This ensures a stable floating floor on top of the underfloor heating foil heaters.
Installing insulation boards over a concrete subfloor helps improve the efficiency and performance of an underfloor heating system. Without insulation, a significant amount of heat can be absorbed by the concrete, increasing warm-up times and reducing the amount of heat transferred into the room. Insulation boards create a thermal barrier that directs more heat toward
Why should I use insulation boards on a concrete base? Read More »
Ensuring the total load does not exceed the maximum rating of the thermostat, two heaters can be connected before requiring a junction box.
A thermostat should always be installed by a qualified electrician in accordance with local electrical regulations. This helps ensure the system operates safely, performs as intended, and remains covered by the manufacturer’s warranty where applicable. Most underfloor heating thermostats are designed to control one or more heating zones, provided the combined electrical load does not
Can I Install a Thermostat Myself? Read More »
Yes. A single thermostat can still be used to control an underfloor heating system with a total electrical load greater than 16 amps, provided the installation includes a suitable contactor or relay to handle the additional load. In this type of installation, the thermostat acts as the control device while the contactor switches the higher
Can I Use One Thermostat If the Total Load Exceeds 16 Amps? Read More »
Warmup offers an extensive range of electric and water floor systems compatible with all floor types, rooms and projects. Now with 7iE and Smartcare.
![Thumbnail [200x250]](/wp-content/uploads/Electric-Category-Page-Image.jpg)
![Thumbnail [200x250]](/wp-content/uploads/Hydronic-Category-Page-Image-1.jpg)
![Thumbnail [200x250]](/wp-content/uploads/6iE-Projects.jpg)
