Home / Wiring / 4iE Smart WiFi Thermostat

The air temperature on my 4iE is not right

If you find that the air temperature on the 4iE is not correct, check that the thermostat has been set up correctly.

The air sensor in the thermostat should not be located near any heat-inducing elements, such as spotlights or full sunlight.

On initial 4iE setup, if the incorrect total wattage of the heaters or the wrong system type was selected an air temperature discrepancy may occur.
To resolve the issue go to my.warmup.com and delete the room beofre re-adding with the correct information.

Also, if a contactor or relay has been used, then it is important that this has been programmed into the thermostat on the initial setup.


Further Questions?